Bulb trim seals are used with doors, hatches, and enclosures. They have two sections: the bulb and the retainer. The bulb section provides sealing and insulation under compressive force. The trim or retainer section presses onto a flange or substrate.
Elasto Proxy supplies many different types of industrial rubber products, but there are three things about bulb trim seals that engineers need to know. Continue reading Bulb Trim Seals: Three Things Engineers Need to Know
When a manufacturer of water filtration systems needed a rubber gate seal that would last longer and resist ultraviolet (UV) light, Elasto Proxy provided a value-added solution. This custom gasket doesn’t just resist exposure to water, contact with metal and concrete, and disinfection with UV light. The gate seal also supports ease-of-installation and is ready to ship from Elasto Proxy’s warehouse in Newmarket, Ontario.
The 60-durometer EPDM lip seal (J-seal) that Elasto Proxy provides attaches to the bottom of a metal gate used in water treatment facilities. This rubber seal is also compressed against hard concrete floors and exposed to a range of temperatures. UV disinfection kills waterborne microbes that can make people sick, but ultraviolet light can also degrade rubber materials. Without reliable sealing and strong bonding, gaskets like this can’t meet business or technical requirements.
To provide a complete sealing solution, Elasto Proxy leveraged its expertise in seal design, material selection, custom fabrication, warehousing, and logistics. Continue reading Rubber Gate Seal for Water Filtration System Lasts Longer, Resists Disinfection, Adds Business Value
Cold bonding for rubber gaskets joins lengths of material without the use of heat. This bonding technique doesn’t require low-temperature conditions, but is called “cold” because no heat is applied to the gasket. By contrast, hot splicing requires either a conventional heat source or infrared (IR) light. Vulcanization and molded corners for rubber gaskets also involve heating gasket materials.
With cold bonding, an adhesive is applied to the ends of the lengths that will be joined together. Different types of bonding systems are available, including compounds that vary in terms of viscosity, chemistry, and material properties. Cold bonding for rubber gaskets can save time and eliminate tooling costs, but engineers need a complete understanding of this joining method before choosing glued gaskets. Continue reading Cold Bonding for Rubber Gaskets
Molded corners for rubber gaskets are recommended for applications that require rounded joints, the ability to withstand stretching, or high cycle times. Molding is more expensive than hot splicing or vulcanization, but it’s the only way to create radisued corners. C-press injection molding, a bonding method for rubber gaskets, is ideal for low-to-medium volume quantities but suitable only for solid profiles.
By understanding how C-press injection molding works and the advantages that molded corners provide, engineers can make strong decisions about gasket fabrication. In this article, the second in a series from Elasto Proxy, we’ll continue our coverage of joining methods. Next week’s content, the last in our series, will examine cold bonding. Continue reading Molded Corners for Rubber Gaskets
Hot splicing and vulcanizing for rubber gaskets are bonding techniques that use heat, pressure, and a film splice or uncured rubber to join the ends of profiles. Hot splicing uses thin polyethylene (PE) film and either a conventional heating source or infrared (IR) light. Vulcanization uses an uncured rubber compound, along with heat and pressure. Both hot splicing and vulcanization create chemical bonds at the molecular level.
For engineers, choosing a splicing method for rubber gaskets is an important manufacturing decision. By balancing costs against capabilities, you can get the sealing and insulation solutions that you really need. Traditional hot splicing, infrared or IR splicing, and vulcanization all have their advantages, but they also have their differences. In this article, the first in a series from Elasto Proxy, we’ll examine each of these bonding techniques in detail. Future articles will cover molded corners and cold bonding. Continue reading Hot Splicing and Vulcanizing for Rubber Gaskets